Databases

Multiple sources of CVE information can be registered and used by sbom-cve-check tool. There are two kinds of databases:

The CVE database provides general information about CVEs. However, some of this information may be missing:
- A CVE identifier.
- A description.
- Vulnerable versions, and not vulnerable versions. These version ranges are provided, among other things, via a CPE match block.
- CPE provides vendor and product names, which allows to identify the component.
- CVSS (Common Vulnerability Scoring System) information, including the score and the vector string.
The annotation database, which provides a VEX assessment for a specific CVE. This assessment is tied to one or more specific component versions: The analysis was realized for these versions. In addition to this assessment, the annotation entry can provide the same kind of information contained in a CVE database.

Common database options

All database options can be specified from the command line, using --add-db or --set-db-cfg flags, or from one or more TOML configuration files as described in the database configuration subsection.

Database type

The following CVE and annotation databases are supported:

Name	Short description
`openvex-file`	Path to one OpenVEX annotation file
`openvex-dir`	Directory containing OpenVEX annotation files
`spdx3-file`	Path to one SPDX v3.0 SBOM file
`yocto-vex-manifest`	Path to Yocto Project VEX manifest, generated by vex.bbclass
`simple-annotations`	Directory containing simple YAML annotation files
`cve-db-nvd-fkie`	Path to FKIE nvd-json-data-feeds git repository
`cve-db-cvelist`	Path to CVEProject cvelistV5 git repository

The database type can be specified in the following ways:

In a configuration file or via the --set-db-cfg flag, using the type= option.
From the command line using the --add-db flag: The first value is the database type name.

Database priority

Each database has a priority, which is an integer: The higher the priority value, the higher the priority.

When checking for CVE, for a specific component identified, for example, by a CPE, the list of applicable CVE is obtained. Then, for each applicable CVE, each database is queried from the highest to the lowest priority, and an assessment is retrieved or computed. The highest valid assessment that was obtained is used in the export file.

An annotation database must have a unique priority: Another database cannot use the same priority. But a CVE database can have the same priority, which is the default for the NVD and the CVE List databases.

If the priority is not explicitly set using the priority= option, a default value is automatically assigned based on the following rules:

CVE databases (CVE List and NVD): Priority is set to 50.
Other databases (primarily annotations):
- If the information is provided via the command line (e.g., from the SBOM or using --yocto-vex-manifest), the priority is set to 100 plus the declaration order of the database.
- If the information is provided via a configuration file or the command line using the --add-db or --set-db-cfg flag, the priority is set to 200 plus the declaration order of the database.
- Priority order for declarations:
  1. Databases declared using the --add-db flag.
  2. Databases declared in configuration files.
  3. Databases declared using the --set-db-cfg flag.

In summary, the CVE databases should have the lowest priority, the databases added from the command line the middle priority, and the databases added from the configuration file the highest priority. And the databases declared at the beginning (of the configuration file, or of the command line) will have a lower priority than a database declared at the end.

Database path

Each database must have a path, which can be specified as follows:

In a configuration file or via the --set-db-cfg flag, using the path= option. If a relative path is used, it is interpreted by default relative to the directory containing the configuration file (as described in the configuration section).
From the command line using the --add-db flag: The second value is the database path. If a relative path is used, this is a relative path to the current working directory.

This path can point to a file or a directory depending on the database type.

The path= option specified in a configuration file can contain environment variables: ${name} is replaced by the value of the environment variable “name”. Also, if the path starts with an initial component of ~, it will be replaced by that user’s home directory.

If the command line flag --databases-dir is used, it will set or override the SBOM_CVE_CHECK_DATABASES_DIR environment variable to the specified flag value.

If the environment variable SBOM_CVE_CHECK_DATABASES_DIR is not set, it will default to the following value: ~/.cache/sbom_cve_check/databases. This variable is used in the default configuration file: db_default.toml to specify the location of NVD and CVE List databases.

Database name

Each database has a name that describes it. The name may be used in various messages. The name is not required to be unique, but this is recommended. It can be specified:

From a configuration file using the name= option. If not present, it uses, instead, the configuration section name.
From the command line using the --add-db flag, by specifying the name= option. If not present, it uses the filename specified in the database path.

Obsolete assessment check

Annotation databases have an additional configuration option, named obsolete_assessment_check=. This option takes a boolean. If this option is enabled for a particular annotation database, then it checks if the assessments provided by this database are obsolete.

An assessment is considered obsolete if a CVE or annotation database with a lower priority provides the same kind of CVE assessment.

The list of obsolete assessments can be exported depending on the selected exporter.

By default, for all annotation databases, the search for obsolete assessments is disabled. It can be enabled or disabled for a specific database using the option previously mentioned. To change the default, and to be able to search for obsolete assessments on all annotation databases, the following flag needs to be set: --check-obsolete-assessment-by-default.

The search for obsolete assessments is not enabled by default, since it can make the execution of the tool way slower in some cases.

Disabling a Database

To disable a database, add the following configuration option:

disabled = true

Git database options

Some database types can be fetched from a git repository. These databases take the following configuration options:

git_url=: Allow to specify or to override the default fetch URL of the git repository. The repository will be cloned in the directory specified by the path= database option. This directory is going to be a git repository, the git is not cloned inside a subdirectory.
auto_update_max_age=: Configures the maximum allowed duration since the last “update”. For details on what constitutes the last “update”, refer to the max_age_since_last_commit= option. If this duration is exceeded, the tool automatically updates the Git repository to the latest commit of the selected branch. If not specified, the default value is 20 hours. Otherwise, it takes either:
- A duration in seconds (or in other time units).
- The special string off. If set to off, the Git database will never be updated.
- The value 0. In this case, a git pull will always be performed.
To globally disable automatic updates, use the --disable-auto-updates flag. This is equivalent to setting auto_update_max_age=off for all Git databases.
max_age_since_last_commit=: A boolean that allows to configure what is considered the last “update”:
- If set to True, it indicates that this is the duration since the last commit. The committer date time of the HEAD commit is used.
- If set to False, this is the duration since the last command that moves the HEAD in a drastic way. The modification date time of ORIG_HEAD is checked. This should reflect the last git fetch/pull.
If not specified, default to True for a CVE database and to False for an annotation database.
cache_index_path=: Path to the cache file containing the database index. By default, the cache file is stored at the root of the git repository under the following file name: .sbom-cve-check-cache-index.json. The cache could be disabled by setting a null value or an empty string to this option.
git_branch=: Clone from a specific branch name. If not set, use the default remote branch.
git_ref=: Checkout a specific commit identifier or tag. If this configuration is not set, checkout the latest (HEAD) commit from remote.

If the git branch is not specified, when cloning, consider that the git reference is a tag, and clone the tag directly. Combined with the git_fetch_depth= option, that allows cloning only the tag and not the complete git history.

After an initial clone, if the git reference is changed in the configuration file, the git branch should be specified. The complete git history will be downloaded. If this is not wanted, the git repository could be removed. This way a new clone will be realized.
git_fetch_depth=: Configure git clone/fetch depth. By default, if this option is not set:
- When cloning, if no git reference is specified, a shallow clone is realized with a depth of 1. Otherwise, a normal clone is realized.
- When fetching to update the git repository, do not limit the number of commits to fetch.

Warning

Be aware that any commit not pushed to remote, or any local modifications will be discarded.

Before each CVE analysis, the git repository is reset. If you do not want this and prefer to manage the Git repository on your own, do not set git_url= or set it to an empty string. Otherwise, your local modifications will be overwritten/lost.

Database types

Each supported database type may have additional configuration options.

openvex-file

This annotation database provides a unique OpenVEX JSON file. The database path needs to point to the JSON file.

openvex-dir

This annotation database is a directory containing one or multiple OpenVEX json files. The database path needs to point to this directory.

This database type requires an additional configuration option: globs=. This is a list of glob patterns, which allows only matching files to be provided. If it is specified from the command line, the value passed to the globs= option needs to be a comma-separated list.

For example the following patterns could be used:

*/CVE-*.json: it matches any directory (only one level), then any file starting with CVE- and ending with .json.
**/*.json: it matches any number of directory segments, then it matches any files ending with .json.

For more information about glob pattern language, see the pathlib documentation.

This database can optionally be fetched from a git repository. To enable that, the git_url option must be specified. Additional associated options can be configured as described in the git database section.

spdx3-file

This annotation database provides a single SPDX v3.0 JSON file. While it is possible to manually add an SPDX v3.0 database, it is expected, and much more common, for this database to be added automatically via the input SBOM file.

yocto-vex-manifest

This annotation database provides a single Yocto Project VEX manifest file generated from the Yocto Project vex.bbclass.

This file contains the following information for each Yocto Project recipe (non-exclusive list):

package version
list of CPE
list of associated Yocto Project annotations specified by CVE_STATUS

By default, in the Yocto Project, the file is provided in the deploy directory with the following name: ${IMAGE_BASENAME}-${MACHINE}.rootfs.json

For convenience, this database file can also be directly added with the --yocto-vex-manifest flag followed by the path to the Yocto Project VEX manifest file. But in that case, no additional options can be specified: default options will be used.

simple-annotations

This annotation database is a directory containing one or multiple YAML files. The database path needs to point to this directory.

This database type requires an additional configuration option: globs=. This is a list of glob patterns. Each pattern could be:

A path to a directory. In this case, search in this directory for files named with the following format: CVE-2025-1234.yaml.
A pattern matching a CVE YAML file.

If it is specified from the command line, the value passed to the globs= option needs to be a comma-separated list.

The YAML file name must be the CVE identifier. Any extensions could be used, but it is recommended to use either .yaml or .yml. If a custom file extension is used, you must specify a pattern that matches the filename.

This database type has an additional optional option: arch=. This option configures the architecture of the image that is going to be analyzed. For example arm, arm64 or x86-64. This option allows to filter annotations YAML files that have the arch-only key as described below.

The example below is one annotation entry for the CVE id CVE-2025-1234, which must be named CVE-2025-1234.yaml:

vulnerable: 'no'
last-review: '2025-01-01'
cve-product: curl:libcurl
versions: [7.12.3]
comment: 'Not applicable because ...'

The YAML file must contain the following keys:

vulnerable: Can be either a boolean or a string. In case of a string, if the value is equal to no then the CVE is considered not vulnerable, otherwise any other value is considered vulnerable.
last-review: A date time encoded in ISO format
cve-product: Either the vendor and the product name are separated by a colon, or just the product name.
versions: The list of versions that indicates which package version this annotation applies to. If in the SBOM the package version does not strictly match, this annotation is ignored.
comment: The annotation statement

The YAML file can contain additional keys, including the following optional keys:

arch-only: A list of architecture, for example [arm, arm64]. If this key is missing, this is the same as specifying [all]. If all is specified inside the arch-only list, no filtering is going to occur.

Below is an example of a TOML configuration file for this simple annotation database.

[databases.my-annotations]
type = "simple-annotations"
git_url = "git@example.com:my-project/my-annotations.git"
path = "${SBOM_CVE_CHECK_DATABASES_DIR}/my-annotations"
auto_update_max_age = "10min"
max_age_since_last_commit = true
globs = ["common/yocto", "boards/my-board/yocto"]

This database can optionally be fetched from a git repository. To enable that the git_url option must be specified. Additional associated options can be configured as described in the git database section.

cve-db-nvd-fkie

This is a CVE database. This is the community reconstruction of the JSON NVD Data Feeds, managed by FKIE, stored in a git repository.

The database path points to the git directory. The path will be created if it does not exist.

This database also takes the optional configuration options described in the git database section.

cve-db-cvelist

This is a CVE database. This CVE List database contains the catalog of all CVE Records identified by, or reported to, the CVE Program.

The database path points to the git directory. The path will be created if it does not exist.

This database also takes the optional configuration options described in the git database section.

Database Configuration

Databases can be added in multiple ways:

From the command line, using the --add-db or --set-db-cfg flags (as many times as needed).
From configuration files, specified via the --config flag (multiple configuration files can be loaded by repeating the --config flag).

Database Configuration Merge:

If multiple configurations are specified (from files or the command line), they are merged:

A database configured in one file (e.g., [databases.my-annotations]) can be extended or modified in another file using the same identifier.
The second configuration can add new options or override existing ones, but it cannot delete previously declared options.

TOML Configuration File:

The configuration file uses the TOML format. Each database is defined as a table within the databases table. An example can be seen in the subsection below.

Command Line: --add-db Flag:

To add a database directly from the command line, the --add-db flag can be used with the following syntax:

--add-db database-type database-path key1=val1 key2=val2

database-type: The type of the database.
database-path: The path to the database.
key1=val1: Additional options (e.g., name="My Database").

See the subsection below for an example.

Command Line: --set-db-cfg Flag:

To add or override a database configuration from the command line, use the --set-db-cfg flag with the following syntax:

--set-db-cfg database-id key1=val1 key2=val2

database-id: The unique identifier of the database (which is the “databases” section name in the TOML file).
key1=val1: Additional options (e.g., name="My Database").

Database Types:

For a list of supported database types, see the Database Type subsection. Detailed documentation for each type is available in the Database Types section.

Duration units

The duration of a configuration value can have a suffix to indicate the time unit. The following suffixes are supported:

Supported suffixes	Unit
`msec`, `ms`	milliseconds (0.001 seconds)
`seconds`, `second`, `sec`, `s`	seconds (1 second)
`minutes`, `minute`, `min`, `m`	minutes (60 seconds)
`hours`, `hour`, `hr`, `h`	hours (3600 seconds)
`days`, `day`, `d`	days (86400 seconds)
`weeks`, `week`, `w`	weeks (604800 seconds)
`months`, `month`, `M`	months (2629800 seconds)

The duration can be specified as a decimal value followed by a unit, with an optional space between the value and the unit. You can also combine multiple units, such as 1h 15min or 1h15min. The space between values is optional.

The duration can be specified in the TOML file as an integer or a decimal value. In this case, the default unit is the seconds.

Boolean value

For an option expecting a boolean value, the following case-insensitive value can be specified:

Possible boolean values	Result
`1`, `yes`, `true`, `on`	True
`0`, `no`, `false`, `off`	False

In the TOML file, it is recommended to specify the value as a normal boolean.

Default configuration file

The tool loads, by default, the internal db_default.toml configuration file, which is stored within this Python package, which contains the configuration for the default databases. To prevent loading this default configuration file, the following flag can be specified: --ignore-default-config.

This default configuration file adds the following databases with their respective options:

NVD, downloaded from the FKIE-CAD git repository:
- type is cve-db-nvd-fkie
- name is nvd-fkie
- git_url is https://github.com/fkie-cad/nvd-json-data-feeds.git
CVE List, downloaded from the CVEProject git repository:
- type is cve-db-cvelist
- name is cvelist
- git_url is https://github.com/CVEProject/cvelistV5.git

Both CVE databases share the following options (which are default values):

priority equals 50, as explained in database priority.
auto_update_max_age is set to 20h, and max_age_since_last_commit is set to true, as explained in git database options.

Extending the default configuration

To customize or override the default database configuration, loaded from the internal db_default.toml file, a TOML configuration file can be created.

Below is an example of a TOML configuration file that you can create and pass to the tool using the --config flag:

[databases.nvd-fkie]
git_url = "https://github.com/fkie-cad/nvd-json-data-feeds.git"
auto_update_max_age = "1h"
cache_index_path = "${SBOM_CVE_CHECK_DATABASES_DIR}/index-nvd-fkie.json"

[databases.cvelist]
auto_update_max_age = "50min"
max_age_since_last_commit = false

The key is to define your new options under either the [databases.nvd-fkie] or [databases.cvelist] section.

Example of configuration file

Below is an example of a TOML configuration file that adds a directory containing multiple JSON OpenVEX files:

[databases.Annotations]
name = "My custom annotations"
type = "openvex-dir"
path = "../databases/annotations"
globs = ["abc/*/*.json", "recursive/**/*.json"]
obsolete_assessment_check = true

Example of command-line

To add the same database as described in the subsection above, but this time from the command line, the following arguments need to be specified:

--add-db openvex-dir ../databases/annotations \
  "name=My custom annotations"  \
  "globs=abc/*/*.json, recursive/**/*.json" \
  "obsolete_assessment_check=True"